Remove the seats and, if equipped, harnesses. Mount the contactor on the longer bolts. System automatically turns off to conserve battery life. When installed, the system is simple to operate. In some cases, two versions of a part may be available, such as a 12V or 24V option.
Click the red handle clockwise to release the roller disc brake. Of course, I didn't find this out until backing the cable out to re-spool the cable on the opposite side of the drum, than losing tension on the drum, rendering the winch unusable. Installation: It doesn't get much more straight forward than putting in 4 nuts into the bottom of the winch chassis, and feeding 4 bolts up through your mounting plate into the winch chassis and tightening to the suggested torque. Click the part number to add it to your cart. Torque the winch-mount bolts to 12 foot-pounds.
The only difference is the integrated solenoid on the i version, and part number. Use the big bolts that come in the kit. We replaced the front shock and tire, and buttoned up the console and other bodywork. As reported, no manufacture related problems. The receiver is potted for extreme resistance to water and the elements. It made a good, stiff mount for the bumper.
For additional information, see the Global Shipping Program. Even with the speed wrenches, this was the most time-consuming step. Plug in and zip-tie the wiring in place. We mounted the plug on the dash panel and ran the wires to the rocker switch and down through the console to the contactor. We ran the rope through the Hawse fairlead and installed the hook.
For easy installation, the Wireless Control System comes with a receiver with an internal antenna, and all of the necessary mounting hardware. Thank you for shopping at Montana Jack's! Remember, technical support is free here, just call us at 877-463-2344. If you want to order the part option in the parenthesis instead, please call us. This indicates the system has been activated. The Hawse fairlead mounting plate installs on the front where the bumper bolts on. So, if you are currently in the market for a Self -Recovery winch. A common misconception is that with a winch install, you will need to install a higher amp Alternator and or dual batteries.
The first was when doing a straight line pull on a friends stuck vehicle, and pulled the cable into the wraps on the drum, effectively shearing off the anchor point on the drum. With a K-5 Blazer that weighs in at 6200 lbs. When installed, the system is simple to operate. I haven't had a manufacture related problem with this item as of yet. Install the rocker and snap it into place in the dash. Keep in mind that if your mounting plate isn't predrilled for a winch, this will than be another step that will need to be completed.
With Warn being the premier Electric Winch manufacture in the world, service of you unit, should it ever need it, should not be a issue. This installation is that of all of Warn's Winch Products. Information about choosing the proper Winch for your Application: Winch Safety Notes: Contact Information:. The only problems I've experienced with this product have been with operator related errors. Warn has a Winch for you.
Click the part number to add it to your cart. Slide the winch onto its mounting plate. Trust me, I've put this winch through its paces. Warn had an impressive booth and display at the recent King of the Hammers. The i means integrated solenoid.
The black and red cables go to the battery to be hooked up later. In some cases, two versions of a part may be available, such as a 12V or 24V option. We ordered our winch mounting plate from Warn, thinking we would go for strength and not price. This amount is subject to change until you make payment. The electric wiring is a snap, as the Warn wiring is color-coded. Although, if you were to install a higher amp alternator, it would recharge your power storage equipment battery and using Dual Batteries would allow you more winching time with back-up starting ability.